Airport Hangar Inspection Checklist

Discontinue use of extension cords in lieu of permanent wiring.

Discontinue use of multi-plug adapters in series. 

Remove extension cords through openings, affixed to buildings, or attached in series. 

Maintain wiring in good condition and protect from damage.

Discontinue use of wiring not in conduit.

Provide cover plates.

Replace all damaged/spliced electrical wiring. 

Electrical panel and equipment shall have a minimum of 36” clearance front, 30” sides and 76” height. 

Flammable liquids must be stored in original containers or closed metal cans. 

Store any rubbish exceeding the capacity of a 5-gallon bucket in an approved container. 

Provide 30” clearance from heat producing appliances and combustible material.

Remove combustible storage, waste, trash or weeds.

Remove or store waste material and oily rags in approved/listed closed metal container.

Provide metal drip pans located under the engines of all aircraft.

Provide and post NO SMOKING signs.

Extinguishers must be serviced every 6 years and inspected annually<br>

Extinguishers must be accessible and located appropriately.

Maintain integrity of occupancy and area separation walls.&nbsp;

Remove storage from exits, aisles, corridors, and under stairs.

Reduce storage height to at least 2 feet below ceiling in buildings not protected by sprinklers.

Secure and identify compressed gas cylinders.