Template
Drone Checklist
after your preparation in the office and preparing for drone flight
Start Controller
Turn on the tablet
Connect to wifi or hotspot (if in controlled airspace)
Place drone in location clear of objects and sand / dust
Make SURE propellers are connected
Power on Drone
Start & Login to DJIGo
Clear area around drone 12’ minimum
Select the option to take off (arrow pointing up on screen) Drone will elevate to 4’ … check drone stability and screen
land drone using the stick controls
Start Pix4D
Select the mission project or draw flight plan
Check elevation once more to be safe.
Select Save
Select Start
Pix4D Capture checks all parts and connections .. Once solid green, select START .. the drone will lift off upwards directly to the elevation you specified.
Once there, it will fly to the start location and begin the path to the end point (then returns). Keep sight of the drone at all times in the event the drone heads away from mission (if it does you will need to manually return the drone). You can select PAUSE on the screen anytime to ‘pause’ the drone… you can then manually return the drone.
Watch the flight on the screen and the drone in the air for any problems .. once complete, the drone will return to the location it lifted .. be sure no one is around where drone will land .. again, select PAUSE if you determine drone may land incorrectly and manually land the drone
Remove Sim Card and upload to a new project on www.pix4d.com
This creates a private checklist in your account.